AGSC (File Format)

Revision as of 19:17, 16 May 2016 by imported>Jackoalan (→‎MIDI Setup Entry)

AGSC is the sound effect format for Metroid Prime and Metroid Prime 2: Echoes. Each AGSC file contains a group of sound effects. The first two Metroid Prime games utilize the MusyX audio engine created by Factor5 and as a result, AGSC files are essentially just embedded MusyX files.

The audio codec used in AGSC is the standard GameCube DSP-ADPCM codec, but MusyX itself also offers uncompressed PCM and IMA-ADPCM as options.


To do:
Better descriptions for how SoundMacros work and a description for what each command does.
This file format is almost completely documented
The proj and sdir chunks have a couple unknowns left.


Format

The AGSC format is essentially four data chunks combined into one resource, each of which is a standard MusyX file. Of the four data chunks (pool, proj, samp, and sdir), there's one for sound engine scripts, one for sound properties, one for actual ADPCM sound data, and one for sound metadata. The main difference between Prime 1 and 2 is the header, and some slight changes in the way the four chunks are organized. In Metroid Prime, each chunk begins with its own size value; in Metroid Prime 2, every chunk instead has its size listed at the beginning of the file, at the end of the header. In addition, in Metroid Prime, the third chunk is samp, and the fourth is sdir; in Metroid Prime 2, it's the other way around.

Header

Metroid Prime

Offset Size Description
0x0 D Audio Directory. Always "Audio/." Zero-terminated.
0x0 + D N Audio Group Name. Zero-terminated.
0x0 + D + N End of header

Metroid Prime 2

Offset Size Description
0x0 4 Unknown; always 1
0x4 D Audio Group Name. Zero-terminated.
0x4 + D 2 Group ID; 0xFFFF if unspecified
0x6 + D 4 Pool size
0xA + D 4 Project size
0xE + D 4 Sample directory size
0x12 + D 4 Sample size
0x16 + D End of header

Pool

The Pool chunk contains sub-chunk tables for SoundMacros, ADSR, keymaps, and layers, if applicable. It starts with a 16-byte header before the different data tables begin.

Offset Size Description
0x0 4 SoundMacros Offset (always 0x10)
0x4 4 Tables Offset
0x8 4 Keymaps Offset
0xC 4 Layers Offset
0x10 End of entry

ObjectID

After this are four tables of objects. Each object is identified with a 16-bit ObjectID:

Offset Size Description
0x0 1 Sound object type
  1. SoundMacro
  2. Table
  3. Keymap
  4. Layer
0x1 1 Unique ID (per type namespacing)
0x2 End of ObjectID

Note: This is the ID structure produced by MusyX data export tool used for Metroid Prime (which allocates all group ObjectIDs on export). The ObjectID structure is actually an arbitrary 16-bits in MusyX (limited to 14-bit uniqueness). Based on findings from other games, this upper-byte type source is not 100% reliable, since Factor5 updated the tool during the console's lifetime.

SoundMacros

The first Pool table denotes MusyX's SoundMacros, small scripts that apply various effects on the sounds in the game. Each macro is composed of a header followed by a number of commands; each command specifies its type through a single-byte command ID, then specifies the parameters of that particular command, which vary.

The header of each SoundMacro is eight bytes, and is structured as follows:

Offset Size Description
0x0 4 Chunk Size (note: includes the size value itself)
0x4 2 SoundMacro ObjectID
0x6 2 Padding
0x8 Commands begin

On the commands, each 4 bytes were originally little endian, but have been swapped to big endian in the AGSC files (despite not being longs). To read the data as originally formatted, every four bytes needs to be byte-swapped. Each command is 8 bytes, and is structured as follows:

Offset Size Description
0x0 1 Command ID (varies; there are 79 known commands in the MusyX audio engine.)
0x1 7 Command arguments (varies between commands)
0x8 End of entry

The SoundMacro will continue with commands until it terminates when the END command is executed. The command ID for END is 0 and has null command arguments; the next SoundMacro begins after reading it.

These are the possible commands:

ID Name Arguments
0x1 STOP
0x2 SPLITKEY Keynumber SoundMacro ID SoundMacro step
0x3 SPLITVEL Velocity SoundMacro ID SoundMacro step
0x4 WAIT_TICKS Keyoff Random Sampleend Absolute ms switch Ticks/Millisec.
0x5 LOOP Keyoff Random Sampleend SoundMacro step Times
0x6 GOTO SoundMacro ID SoundMacro step
0x7 WAIT_MS Keyoff Random Sample end Absolute Millisec.
0x8 PLAYMACRO Addnote SoundMacro ID SoundMacro step Priority MaxVoices
0x9 SENDKEYOFF Variable Last started
0xA SPLITMOD Mod value SoundMacro ID SoundMacro step
0xB PIANOPAN Scale Centerkey Centerpan
0xC SETADSR Table-ID (ADSR) DLS mode
0xD SCALEVOLUME Scale Add Table-ID (Curve) Org vol
0xE PANNING Pan position Time ms Width
0xF ENVELOPE Scale Add Table-ID (Curve) Org vol
0x10 STARTSAMPLE Sample-ID Mode Offset
0x11 STOPSAMPLE
0x12 KEYOFF
0x13 SPLITRND RND SoundMacro ID SoundMacro step
0x14 FADE-IN Scale Add Table-ID (Curve) ms switch Ticks/Millisec.
0x15 SPANNING Pan position Time ms Width
0x16 SETADSRCTRL Attack Decay Sustain Relase
0x17 RNDNOTE Note Lo Detune Note Hi Fixed/Free Abs/Rel
0x18 ADDNOTE Add Detune org key ms switch Ticks/Millisec.
0x19 SETNOTE Key Detune ms switch Ticks/Millisec.
0x1A LASTNOTE Add detune ms switch Ticks/Millisec.
0x1B PORTAMENTO Port. State Port. Type ms switch Ticks/Millisec.
0x1C VIBRATO Level note Level fine Modwheel flag ms switch Ticks/Millisec.
0x1D PITCHSWEEP1 Times Add ms switch Ticks/Millisec.
0x1E PITCHSWEEP2 Times Add ms switch Ticks/Millisec.
0x1F SETPITCH Frequency (Hz) Fine
0x20 SETPITCHADSR Table-ID (ADSR) Note range Detune range
0x21 SCALEVOLUME DLS Scale Org vol
0x22 MOD2VIBRANGE Key range Cent range
0x23 SETUP TREMOLO Tremolo scale Modw. add scale
0x24 RETURN
0x25 GOSUB SoundMacro ID SoundMacro step
0x28 TRAP_EVENT Event SoundMacro ID SoundMacro step
0x29 UNTRAP_EVENT Event
0x2A SEND_MESSAGE IsVar Macro VID Variable
0x2B GET_MESSAGE Variable
0x2C GET_VID Variable PLAY_MACRO
0x30 ADDAGECOUNT Add
0x31 SETAGECOUNT Counter
0x32 SENDFLAG Flag-ID Value
0x33 PITCHWHEELR Range up Range down
0x34 SETPRIORITY Prio
0x35 ADDPRIORITY Add
0x36 AGECNTSPEED Time
0x37 AGECNTVEL AGE Base AGE Scale
0x40 VOL_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x41 PAN_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x42 PitchW_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x43 ModW_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x44 PEDAL_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x45 PORTA_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x46 REVERB_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x47 SPAN_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x48 DOPPLER_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x49 TREMOLO_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x4A PREA_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x4B PREB_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x4C POSTB_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x4D AUXAFX_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x4E AUXBFX_SELECT MIDI Contr. Scaling percentage Combine is var. Fine scaling
0x50 SETUP_LFO LFO Nr. Period in ms
0x58 MODE_SELECT DLS vol ITD
0x59 SET_KEYGROUP group kill
0x5A SRCMODE_SELECT SRC type Type 0 SRC filter
0x60 ADD_VARS Var/Ctrl A = Var/Ctrl B + Var/Ctrl C
0x61 SUB_VARS Var/Ctrl A = Var/Ctrl B - Var/Ctrl C
0x62 MUL_VARS Var/Ctrl A = Var/Ctrl B * Var/Ctrl C
0x63 DIV_VARS Var/Ctrl A = Var/Ctrl B / Var/Ctrl C
0x64 ADDI_VARS Var/Ctrl A = Var/Ctrl B + Immediate
0x70 IF_EQUAL Ctrl A == Ctrl B Not SoundMacro Step
0x71 IF_LESS Ctrl A < Ctrl B Not SoundMacro Step
0x0 END

After the last soundmacro, the table terminated by a value of 0xFFFF.

Tables

Tables have two functions: for defining curves for volume scaling, or to be used as ADSR envelopes.

The tables continue until 0xffffffff terminator is reached.

Offset Size Description
0x0 4 Chunk Size
0x4 2 Table ObjectID
0x6 2 Padding
Chunk Size ADSR/Curve data
ADSR

When the size of the table data is exactly 8, it may represent ADSR envelopes with this structure:

Offset Size Description
0x0 1 Attack time (0-255 milliseconds); no multiplication is done to the value
0x1 1 Attack time (0-65280 milliseconds); multiply value by 256
0x2 1 Decay time (0-255 milliseconds); no multiplication is done to the value
0x3 1 Decay time (0-65280 milliseconds); multiply value by 256
0x4 1 Sustain (percentage); multiply value by 0.0244
0x5 1 Sustain (percentage); multiply value by 6.25
0x6 1 Release time (0-255 milliseconds); no multiplication is done to the value
0x7 1 Release time (0-65280 milliseconds); multiply value by 256
0x8 End of ADSR
DLS ADSR

MusyX can also express more advanced envelopes using a modified DLS representation. This representation includes scaling coefficients to respond to played note and velocity (so slamming down a key harder plays longer).

The attack and decay members are expressed in time-cents. This may be converted to seconds using: 2timecents / (1200.0 * 65536.0)

The attack and decay scale members are expressed as 0.1% increments in 16.16 fixed-point. This may be converted to a normalized factor using: scale / (1000.0 * 65536.0)

Offset Size Description
0x0 4 Attack time; in time-cents
0x4 4 Decay time; in time-cents
0x8 2 Sustain; percentage mapped between [0x0,0x1000]
0xA 2 Release; in milliseconds
0xC 4 Velocity to Attack Scale; 0.1% increments as 16.16 fixed-point
0x10 4 Key to Decay Scale; 0.1% increments as 16.16 fixed-point
0x14 End of DLS ADSR
Curves

To express a volume curve, the table data is simply an arbitrarily-sized table of uint8_t values

Keymaps

Keymaps are swappable, fixed-length tables mapping 128 MIDI keys to sound-producing objects.

The keymaps continue until 0xffffffff terminator is reached.

Offset Size Description
0x0 4 Chunk Size; (usually 0x1032)
0x4 2 Keymap ObjectID
0x6 2 Padding
Chunk Size 128 Keymap entries
Keymap Entry
Offset Size Description
0x0 2 ObjectID
0x2 1 Transpose
0x3 1 Pan
0x4 1 Priority Offset
0x8 Padded to 8 bytes

Layers

Layers are one-to-many, ranged keyboard mappings to sound-producing objects.

The layers continue until 0xffffffff terminator is reached.

Offset Size Description
0x0 4 Chunk Size
0x4 2 Layer ObjectID
0x6 2 Padding
Chunk Size Layer data
Layer Data

Within the layer data, there is a u32 count of layer range structs:

Offset Size Description
0x0 2 ObjectID
0x2 1 Key Lo
0x3 1 Key Hi
0x4 1 Transpose
0x5 1 Volume
0x6 1 Pan
0x7 1 Priority Offset
0x8 1 Unknown; usually 0x40
0xC Padded to 12 bytes

The entire Pool chunk is terminated by a value of 0xFFFF.

Project

The Project properties chunk contains values for the sounds, including priority, polyphony, volume, etc.

Structurally, the Project is the root of the Audio Group tree, defining one or more Song Groups or SFX Groups

Offset Size Description
0x0 4 Group end offset (points to next group in project)
0x2 2 Group ID
0x4 2 Group Type; 0 for SongGroup (for use with CSNG), 1 for SFXGroup.
0x8 4 SoundMacro ID table offset
0xC 4 Sample ID table offset
0x10 4 Tables table offset
0x14 4 Keymaps table offset
0x18 4 Layers table offset
0x1C 4 Normal page table (SongGroup) / SFX table offset (SFXGroup)
0x20 4 Drum page table offset (SongGroup)
0x24 4 MIDI Setup table offset (SongGroup)
0x20 End of group header

After the header are a number of data tables.

SoundMacro ID Table

This is a ranged-table of shorts; there's no count value, so it's terminated with a value of 0xFFFF. It's a list of SoundMacro IDs present in the file. Contiguous ranges are expressed by IDs with most-significant bit set (0x8000). The range begins on the marked ID and incrementally reaches the next ID in the list, including that ID. All other IDs are singular.

Sample ID / Table / Keymap / Layer Tables

These function the same way as the SoundMacro ID table, but indexes other types of entities instead.

Normal / Drum Page Entry

Used to map General MIDI program numbers (instruments) to sound entities (macros, keymaps, layers)

Offset Size Description
0x0 2 ObjectID
0x2 1 Priority; voices are limited, so priority is used to play more important sounds over others
0x3 1 Max number of voices
0x4 1 GM Program Number
0x5 1 Padding

SFX Entry

Used to map auto-generated #define IDs (used by game code) to sound entities (macros, keymaps, layers)

This table begins with a 16-bit count value, then 16 bits of padding. Each entry in the table is 10 bytes.

Offset Size Description
0x0 2 DefineID; referenced by game code
0x2 2 ObjectID
0x4 1 Priority; voices are limited, so priority is used to play more important sounds over others
0x5 1 Max number of voices
0x6 1 Definite Velocity; volume (usually 7F)
0x7 1 Panning
0x8 2 Definite Key; The default pitch (usually 0x3C00... the second byte may possibly be the MIDI channel)

MIDI Setup Entry

Table of fixed-length tables to map all 16 MIDI channels to program numbers (in-turn resolving to sound entities via the page table).

Multiple MIDI Setups may be created to support Song data requiring totally different banks of instruments.

Each MIDI Setup starts with a u16 MIDI-Setup-ID, then 16-bits padding, then 16 entries of the following structure (one for each channel):

Offset Size Description
0x0 1 Program Number
0x1 1 Volume
0x2 1 Panning
0x3 1 Reverb
0x4 1 Chorus

MIDI setups continue until the group end offset is reached.

Sample

The Sample chunk is all the sound data encoded using the standard Gamecube DSP ADPCM codec. It can be decoded the same way as a DSP file. Each sound's size is padded to 32 bytes before the next sound's data begins.

Sample Directory

The Sample Directory chunk (chunk 4 in Metroid Prime, chunk 3 in Metroid Prime 2) is made up of two sets of tables. The structure of both these tables is identical between both games.

Table A

The first metadata table has one entry per sound, and is terminated with 0xFFFFFFFF; since there's no known sound count anywhere in the file, the only way to read this correctly is to read until you reach the terminator value. Each entry is 0x20 bytes long.

Offset Size Description
0x0 2 Sound ID
0x2 2 Padding; always 0
0x4 4 Sound start offset, relative to the start of the ADPCM chunk
0x8 4 Unknown
0xC 1 Base Note; Corresponds to the MIDI note played in the sample, at the native sample-rate (which MusyX obtains from the INST chunk of .aiff files or SMPL chunk of .wav files, along with looping info). To play at a specified pitch in cents, set the playback sample rate using this formula: sampleRate * 2((pitch - baseNote * 100) / 1200.0)
0xD 1 Padding; always 0
0xE 2 Sample rate
0x10 1 Audio format
  1. DSP-ADPCM
  2. IMA-ADPCM
  3. PCM
0x11 3 Number of samples
0x14 4 Loop start sample
0x18 4 Loop length, in samples. To get the loop end sample, add this to the start sample and subtract 1.
0x1C 4 Table B entry offset, relative to the start of the sound metadata chunk
0x20 End of entry

Table B

These are accessed through the offsets in table A's entries; note that it might not match the sound count, because the same entry in this table can be used with multiple sounds. Each entry is 0x28 bytes long.

Offset Size Description
0x0 2 Unknown; always 8
0x2 1 Initial predictor/scale (matches first frame header)
0x3 1 Loop predictor/scale (matches loop start frame header)
0x4 2 Loop context sample history 2
0x6 2 Loop context sample history 1
0x8 2 × 16 Decode coefficients
0x28 End of entry

Tools