SCAN (Metroid Prime 2)

This article is for the SCAN format from Metroid Prime 2 and 3. For other revisions of this format, see SCAN (File Format).

The SCAN file format describes scannable objects. The format's been updated since Prime 1; the data is now embedded into a script object, using the scriptable layers format. There was also some additional data added to the format to set up the model that displays in the logbook.

This file format is almost completely documented There's a couple remaining unknown parameters.

Format

The SCAN format sets up a small script layer that contains a single ScannableObjectInfo instance.

Header

Offset	Size	Description
0x0	4	Magic; always SCAN
0x4	4	Unknown; always 2
0x8	1	Unknown
0x9	4	Instance count; always 1

ScannableObjectInfo

This section of the file embeds a ScannableObjectInfo script object.

Offset	Size	Description
0x0	4	Object type; always SNFO
0x4	2	Instance size
0x6	4	Instance ID; always 0
0xA	2	Connection count; always 0
0xC	4	Base property ID; always 0xFFFFFFFF
0x10	2	Base property size
0x12	2	Property count; 0x14 for Prime 2, 0x16 for Prime 3

Properties (Echoes)

These are all the properties a ScannableObjectInfo instance contains:

ID	Type	Name
0x2F5B6423	STRG	Scan Text
0xC308A322	long	Scan Speed (0 for fast, 1 for slow)
0x7B714814	bool	Is Important? (0 for blue, 1 for red)
0x1733B1EC	bool	Use Logbook Model After Scan?
0x53336141	TXTR	Post-Scan Override Texture
0x3DE0BA64	float	Logbook Default X Rotation
0x2ADD6628	float	Logbook Default Z Rotation
0xD0C15066	float	Logbook Scale
0xB7ADC418	CMDL	Logbook Model
0x15694EE1	AnimationParameters	Logbook AnimSet
0x58F9FE99	AnimationParameters	Unknown
0x1C5B4A3A	ScanInfoSecondaryModel	Secondary Model 1
0x8728A0EE	ScanInfoSecondaryModel	Secondary Model 2
0xF1CD99D3	ScanInfoSecondaryModel	Secondary Model 3
0x6ABE7307	ScanInfoSecondaryModel	Secondary Model 4
0x1C07EBA9	ScanInfoSecondaryModel	Secondary Model 5
0x8774017D	ScanInfoSecondaryModel	Secondary Model 6
0xF1913840	ScanInfoSecondaryModel	Secondary Model 7
0x6AE2D294	ScanInfoSecondaryModel	Secondary Model 8
0x1CE2091C	ScanInfoSecondaryModel	Secondary Model 9

ScanInfoSecondaryModel

This struct is used to embed a resource that can be attached to the model in the logbook. The mesh can be either a model or an animset.

ID	Type	Name
0x1F7921BC	CMDL	Secondary Model
0xCDD202D1	AnimationParameters	Secondary AnimSet
0x3EA2BED8	string	Target Bone Name

Dependencies

After the ScannableObjectInfo instance, there's a list of the scan's dependencies present. The list follows the same format as the DGRP format.